How To Use Quick Fix Plus 6.3

Activate hand warmer prior to heating up Quick Fix Plus (may take 30-45 minutes for hand warmer to heat up).
Shake the Quick Fix Plus bottle and microwave on high for 10 seconds. The temperature strip should display a green dot in a range of 94° – 100°F. If the bottle feels warm in your hand, but is not showing a reading on the temperature strip, the synthetic urine is overheated. Simply let it cool down gradually until you see a reading on the temperature strip. If the synthetic urine temperature is below 94°, heat again in the microwave for a few more seconds until you see the green dot on the temperature strip between 94° – 100°F.
Now attach the hand warmer with tape or rubber band to the back of the bottle, opposite the temperature strip. This will provide prolonged heat, keeping the bottle temperature near 100°F for approximately five hours.
If you can’t microwave the Quick Fix Plus, simply attach the hand warmer to bottle at least 1 hour prior to use. Shake bottle before and after heating and prior to pouring. Do not transport or store this product in the flip top cap.
If your product remains unused, it can be reheated repeatedly as needed.